16 Stage Flow Chart

Our unique 16 Stage Ultra Purification and Vitality Enhancing Technology ensures that our water system
removes up to 99%+ of known and unknown water contaminants.
16 Stage Flow Chart
How does this revolutionary water technology work?
PHASE I "Ultra-Pure"
Under counter water filters "polish" or cleanse your water by reducing the amount of rust and sediment, odours and chlorine, lead, bacteria and volatile organic compounds (VOCs) including pesticides such as linden (an agricultural insecticide) and herbicides, for example atrazine. An under counter water filter in your home will provide you with great tasting water for drinking, cooking and making beverages namely coffee, tea and diluting juices.
decorative line


  • Sediment Filter - first filtration stage of tap or well water
  • Solid Carbon Block Filter - second filtration stage of 10 micro-pulverized carbon  
Throughout the first filtration stage, tap or well water passes through a sediment filter where silt, sediment and particles (including sand and clay) are removed. Then in the second stage, water is forced through a high efficiency solid carbon block filter where 10 micro-pulverized carbon efficiently absorbs chlorine, chloramines, pesticides and other harmful organic chemicals and pollutants. This pre-filtered water is now cleaned of membrane-damaging particles and chemicals. These stages protect the RO (Reverse Osmosis) membrane from harmful damage.
decorative line
STAGE 3 & 4 - REVERSE OSMOSIS (First Purifier)
  • Reverse Osmosis
  • Ultrafiltration
STAGES 3 & 4 - First Purifier
For most areas of the world, RO (reverse osmosis) is the only reasonable option for water treatment. It is a continuous self-cleaning ultra-filtration system. ROs remove up to 95% of undesirable water contaminants and total dissolved solids allowing only the clean water to pass. Only the highest quality RO membranes have been individually tested and selected for the "2 Pure H2O" Water System, these membranes usually last 2 to 5 years. The pre-filtered water passes through a thin film reverse osmosis membrane module where pure water molecules are separated, leaving salts, hardness, bacteria, viruses, pyrogens and other impurities isolated and available for flushing from the system. Afterwards the cleaned water goes thru the R.O. membrane, and then passes into an under-the-counter 2.5-gallon pressurized storage tank. This tank usually fills in 1 to 2 hours. The quality of your product water in other single purification reverse osmosis systems depends on the age and quality of the RO membrane. Lower quality membranes can remove up to 95% when new but weakens quickly over time, requiring replacement up to every year.
decorative line
Fundamentals of Deionization by Ion Exchange
Deionization is a method used most often by laboratories to produce purified water on demand. All naturally occurring water contains dissolved mineral salts. In solution, salts separate into positively charged cations and negatively charged anions. Deionization can reduce the amounts of these ions to very low levels (up to a 90% removal of the remaining 5% left from reverse osmosis), through the process of ion exchange.

Cations are removed by cation exchange resin. It replaces sodium, calcium, magnesium, and other cations with hydrogen ions (H+).

Two general types of anion resin are used for deionization: weak base resin and strong base resin. Weak base resin adsorbs strong acids, while strong base resin exchanges chloride, sulfate and alkaline anions for hydroxide ions (OH-). The hydrogen ions from the cation exchange process combine with the hydroxide ions anion exchange process to form water (HOH or H2O).

In a mixed bed deionizer, cation and anion resins are thoroughly mixed in a single cartridge. The mixed resins act like a series of alternating cation and anion exchange cartridges to produce very high quality water. A mixed-bed deionizer typically removes 90% of the remaining total dissolved solids.
decorative line
Bacteria and Virus Disinfection
Bacteria and Virus Disinfection- 3/4" connection - stainless steel housing

A UV lamp purifier should be installed in every home to provide safe drinking water. A must for rural homes or cities where water quality is questionable. Ultraviolet (UV) Lamps disinfect water for residential and commercial applications. UV light disinfection systems will protect you from harmful bacteria (e-Coli), virus, and parasitic cysts (cryptosporidium and giardia-lambia - beaver fever) that have been found in drinking water.

Chlorination of municipal water is not sufficient to kill cysts. Many communities and private homes draw surface water from lakes, streams, reservoirs, or wells that are open to pollution from natural, agricultural and industrial sources.

Ultraviolet lamps create light at 254 NM wavelength; this wavelength penetrates the micro organisms found in water and damages the DNA of the bacteria and virus to prevent replication and renders the organism inactive (all bacteria, virus, moulds, algae, and yeast). Usually UV systems are installed on the inlet pipe to your home killing bacteria and viruses from your incoming water line.

The "2 Pure H2O" water system, pre-filters the water before it reaches the UV system. The reduction levels are 99.99% in properly sized systems. The UV unit does not add any chemicals or by-products to the water. The UV unit uses 25 to 65 watts of power, the same as a light bulb. It plugs into a wall outlet. It is better to leave the unit on all the time; the lamp is rated for 1 year of continuous use. The unit has an alarm to warn of failure. An optional solenoid valve will prevent water flow in case of power failure.

With the "2 Pure H2O" system, cleaning of calcium and iron deposit from the UV lamp is not required. Calcium and iron do not build up on the UV lamp because of the pre-filtration of the water prior to reaching the lamp. The frequency of cleaning for the "2 Pure H2O" Pure Water System depends on the quality of water entering your home. We recommend inspection at least every 6 months. The UV light is resistant to damage by brownouts and voltage fluctuations. It will withstand a range of 90 - 265 volts and still operate properly.
decorative line
Granular Activated Carbon Post-Filter
Helps to reduce particles and prevent possible damage to water-tight seals in faucets and appliances, therefore cutting down on maintenance costs. The Post Carbon Filter uses an activated medium with hundreds of thousands of square feet of absorption area which helps to improve the taste and odor.
decorative line
PHASE II "VitaTech"
Vitality Enhancing Technology
From physics, we know that everything is vibration. Every material reacts on certain frequencies more or less strongly. Ideal vibrations create impulses, which, under defined circumstances, start a chain reaction (of vibrations) with increasing force. Water is changeable; it is able to absorb, transfer and release information in its structure. Therefore, even after physical purification, water still often carries unhealthy electromagnetic frequencies from poisonous substances.

In the last stages of water purification, "2 Pure H2O" technology will erase unwanted frequencies, and reprogram the water to copy that of nature.
decorative line
Erasing Memory Molecule Coherence
STAGES 9 & 10 - Restructuring
A triangular shape magnet is held in a steel casing. Each side of the triangle is a 12,000 Gauss Nd2Fe14B (Neodymium) magnet. At the center point of the triangle where the magnetic energy surrounds the water as it flows through this section, there is a 36,000 Gauss energy touching the tube where the water comes through.

A magnetic field has a defined effect on the passing water. It influences the ions within the water to enhance ion exchange that will improve the oxygen utilization of the water. Most importantly we can imagine the effect of the O2-Pure technology with its ability to erase unwanted frequencies. Yes, as humans we need the right kind of frequencies. This brings us to the next step in "2 Pure H2O" technology.
decorative line
Adding Natural Mineral Properties
Reprogramming 1
When the water flows over the rocks (74 minerals), the previous memory is erased. The 74 minerals then provide new frequencies. The water molecules are shaken by the special field in a way that, for a short time, the clusters and the hydrogen bridges are broken up. At the same time, the water is carried forward in a s-pattern movement, identical to that of water in nature. It is the frequencies of these minerals (that are released into the water) that make the change, and not the minerals themselves.
Adding Natural Earth Properties
Far-infrared energy is sometimes called "the wavelength of life" which causes the water molecules in the body to vibrate.  When the water flow is channeled through natural far-infrared honeycomb shaped ceramic materials, the water is imprinted with the far-infrared frequencies.
decorative line
STAGE 13 - Reprogramming, Part 3:
Natural Flow Surface Tension Lowered
Reprogramming 3
At the same time, the water is brought in a movement (s-pattern), which is copied by nature. When the water flows moves through the ceramic far-infrared balls (also containing minerals) it creates a "S" shape configuration (pattern) that mimics and energizes the water (like free flow form water). The surface tension is reduced, improving the biological permeability and hydration properties.
decorative line
Calcium and Magnesium Re-Mineralization
Calcium and Magnesium and Coral Calcium are now added to the water stream to add a small amount of minerals to balance the water. The effect of these special minerals is to help balance the pH and energize the water, giving it more electrons.

The "2 Pure H2O" Water System combines a number of simple and highly sophisticated technologies, along with precision filters to remove impurities. Some stages remove contaminants more effectively than most conventional filters. Other components of the system energize and re-mineralize the water, using Vitality Enhancing Technology to provide sparkling clear, great-tasting water. One of the basics of good health is a daily intake of clean water. It's simple. It's convenient. And it can have a major impact. Now it's possible to have a source of water that is chemically and energetically ready to support your health, right in your home.

Quality housings, filters, and durable mounting frames ensure years of dependable service. Installation by a professional plumber is required. Depending on your household needs, look at our whole house carefree chlorine removal system.
decorative line
Please Note: Actual water system has some proprietary parts not shown.

    Please Call Now For a Free Telephone Consultation, by Appointment   

      416.551.7249 Toronto
gold bar

This information has been provided to you by

Dianne Knight, B.A.


Bookmark and Share
This information has not been reviewed by the U.S. Food and Drug Administration (USFDA) or by Health Canada.
These products are not intended to diagnose, treat, mitigate, cure, or prevent any disease.

Educational and Informational Purposes: All information on this site and all links that are linked to from DianneEMF.com represent solely the opinions of their producers.

This information and links to more information are made available to you as a resource for your own research and evaluation not as an endorsement.

DianneEMF.com is not in the business of persuading you or anyone else to believe anything that that is presented and/or linked to from this site; however, it does encourage you to use all available resources to form your own judgement about very important things that affect your life.

Dianne Knight is a participant in the Amazon Services LLC Associates Program an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and/or amazon.ca..